CORNHOLE BOARDS

    

As with all our products, quality is paramount! Our boards are hand crafted start to finish with as much attention to detail as possible.

- Competition spec boards. Standard dimensions per ACA including static 10 degree board angle.

- Constructed using 3/4" Maple plywood and a separately constructed frame attached to the back of the board.

- Frame is attached using construction adhesive and deep well screws into back of board. No screws go through the face of the board.

- Single piece front leg color matched and attached with heavy duty hinges. Leg stows flush with bottom of frame and held in place with a heavy duty magnet.

- All voids along edge of board filled and sanded. 

- 45 degree chamfer milled along top edge of board perimeter and 6" hole.

We use various methods of creating a custom graphic for the boards, but all boards are wood sealed and every wood surface is finished with a water base polyurethane or clear enamel. Majority of boards on the market use a brush-on polyurethane resulting in brush marks on the playing surface. This not only looks less than professional, but it creates an uneven surface for bags to slide. We spray our clear coats which results in a smooth-as-glass finish.

One game on these boards and you will not want to use anything else!